Bypassing Protection Zones - First Alert FA2000C User Manual

BYPASSING PROTECTION ZONES

Using the
This feature can only be used if a remote keypad has been
installed with the system. User code numbers 2-6 can only be
6 BYPASS Key
used to bypass emergency and 24 hour non-fire protected zones.
This key is used when you want to bypass one or more zones, thus leaving them
intentionally unprotected. For example, a protected stock room door can be
bypassed when it is necessary to open the door without causing an alarm. To
bypass an emergency zone, do the following.
1. Enter your user code and press the BYPASS key.
2. Enter zone number(s) for the zone(s) to be bypassed (e.g., 02, 03, etc.).
Single digit zone numbers must be preceded by a zero.
3. When finished, the keypad will momentarily display a "Bypass" message for
each bypassed zone number. Wait for these zones to be displayed, to
confirm their bypass.
4. A bypass message is sent to the central station.
All emergency zone bypasses are removed when an OFF
sequence (user code plus OFF) is performed.
TYPICAL MOMENTARY DISPLAYS OF BYPASSED ZONE
BYPASS 03 FRONT
UPSTAIRS STORAGE
ALPHA
Ð17Ð
03 AWAY
SUPV NO AC
PHONE TEST
BYPASS
NOT READY
STAY
ALARM
CHIME BAT
FIRE
CHECK INSTANT TAMPER
FIXED-WORD