Fire Alarm Protection; General; In Case Of Fire - First Alert FA2000C User Manual

FIRE ALARM PROTECTION

General

Your system may have sensors which detect fire alarm conditions such as smoke
detectors, heat detectors, sprinkler waterflow sensors, etc. You system monitors these
sensors 24 hours a day for continuous protection and provides a number of indications
when a fire alarm condition is detected.

In Case Of Fire

WHEN A FIRE ALARM CONDITION IS DETECTED, EVACUATE ALL
OCCUPANTS FROM THE PREMISES IMMEDIATELY AND NOTIFY YOUR
LOCAL FIRE DEPARTMENT.
Your system provides the following indications when a fire alarm condition is detected:
¥ The control's buzzer and keypad buzzer produces a slow on/off pulsing sound.
¥ The external fire alarm sounders produce either:
ÊÊÊ a steady sound
depending on what your installer selected (check the appropriate box).
¥ The keypad LCD displays the word "FIRE" (Alpha) or "FIRE ALARM" (Fixed-Word)
along with the number of the zone in alarm.
¥ A fire alarm message is sent to the central station.
If your system has a keypad with a FIRE alarm emergency key, then these indications
may be manually triggered by pressing this key for at least 2 seconds, (or the
corresponding emergency key pair), should you become aware of a fire emergency
before your detectors sense the problem.
or ÊÊÊ a pulsing sound,
FIRE 05
FILE ROOM
ALPHA
Ð14Ð
AWAY SUPV NO AC
05
PHONE TEST
BYPASS
NOT READY
STAY
ALARM
CHIME BAT
FIRE
CHECK INSTANT TAMPER
FIXED-WORD