Quick Guide To System Functions - First Alert FA2000C User Manual

QUICK GUIDE TO SYSTEM FUNCTIONS

FUNCTION PROCEDURE
Silence Alarm, Press the SILENCE/RESET button or
Supervisory or Enter user Code + OFF key.
Trouble sounds
Reset Smoke Press the SILENCE/RESET button a second
Detectors & time or
Displays
Re-enter user Code + OFF key.
Manually Trip Press key [A], [B], or [C] for at least 2 sec., or
Emergency press keys [1]&[ ], or [ ]&[#], or [3]&[#],
Alarms both at same time.
Bypass To bypass , enter user code + BYPASS key +
Emergency
zone number(s) (use 2-digit entries).
Zone(s)
To remove bypass, enter user code + OFF key.
Fire Drill Test To activate: Enter User Number 2's code + # +
6 + 9.
To turn off: Enter any user code + OFF key.
Assign, change, To assign or change: Enter User Number
or delete user
2's code + CODE key + user number (2Ð6)
code.
+ new code.
COMMENTS
SILENCED LED lights. Memory of fault remains until cleared.
Keypad displays # of faulted zone.
Will reset only if fault corrected.
Key(s) must be enabled by installer.
Bypassed zones will not cause an alarm if violated.
Activates external fire alarm sounders.
To delete : Enter User Number 2's code + CODE key +
user number (3Ð6) and stop. Note: User Number 2 can
change but not delete his/her own code.
Ð22Ð