Activating A Fire Drill Test - First Alert FA2000C User Manual

ACTIVATING A FIRE DRILL TEST

Using the This test requires that a keypad and external fire alarm sounder be installed
with the system.
# + 6 + 9 Keys
Note: Only User Number 2's code can activate this test.
This test activates the external fire alarm sounders for the purpose of conducting
This feature can be
a fire alarm drill. Your system will remain operational for fire alarm signaling while
activated only while no
this test is active (although no message will be sent to the central station unless
alarm, supervisory, or
trouble condition is an actual alarm occurs).
present.
¥ To activate the Fire Drill Test:
The keypad LCD will display "FIRE DRILL ACTIVE (Alpha) or "TEST dF"
(Fixed-Word) and the external fire alarm sounders will produce either a steady
or a pulsing sound while this test is active, depending on what your installer
selected.
¥ To terminate the Fire Drill Test:
Your system will also automatically terminate this test if an alarm, supervisory
or trouble condition is detected while it is activated.
Enter User Number 2's code, then press the # + 6 + 9 keys.
FIRE DRILL
ACTIVE
ALPHA
Enter any User Code, followed by the OFF key.
Ð21Ð
dF SUPV NO AC
AWAY
PHONE TEST
BYPASS
NOT READY
STAY
ALARM
CHIME BAT
FIRE
CHECK INSTANT TAMPER
FIXED-WORD