Using The “Scan” Function; How To Eject The Disc; How To Take Care Of And Clean Your Cd Player And Discs - Ford Probe Owner's Manual

Using the "SCAN" function
Press the "SCAN/TUNE" button to enter the
scan mode. Once in the scan mode, press the top
( b ) or bottom ( a ) half of the "SEEK" button to
scan forward or reverse, respectively. The CD
player will begin scanning the disc, stopping on
each listenable track for approximately an
eight-second sampling. This continues until you
press the "SCAN/TUNE" button a second time.

How to eject the disc

Push the "EJECT" button to stop play, eject the
disc and resume radio operation of your audio
system.
NOTE: You can eject the disc while the radio
power and/or ignition is on or off.
How To Take Care of and Clean Your CD
Player and Discs
To ensure the continued performance of your
Ford Compact Disc Player, carefully read the
following precautions:
Always handle the disc by its edge. Never
touch the playing surface.
Before playing, inspect the disc for any
contamination. If needed, clean the disc with
an approved disc cleaner, such as the
Discwasher Compact Disc Cleaner or the
Allsop 3 Compact Disc Cleaner, by wiping
from the center out to the edges. Do not use
a circular motion to clean.
Do not clean discs with solvents such as
benzine, thinner, commercially available
cleaners or antistatic spray intended for
analog records.
31