Trailer Brake Controller-Integrated - Ford Econoline E-150 Owner's Manual

The rating for the tow vehicle's braking system operation is at
the gross vehicle weight rating, not the gross combined weight
rating.
Separate functioning brake systems are required for safe control
of towed vehicles and trailers weighing more than 1500 pounds
(680 kilograms) when loaded.
Integrated Trailer Brake Controller (If Equipped)
WARNING: The Ford TBC has only been verified to be
compatible with trailers having electric-actuated drum brakes
(one to four axles) and some electric-over-hydraulic (EOH) brakes. It
will not activate hydraulic surge-style trailer brakes. It is the
responsibility of the customer to ensure that the trailer brakes are
adjusted appropriately, functioning normally and all electric connections
are properly made. Failure to do so may result in loss of vehicle
control, crash or serious injury.
When used properly, the trailer brake controller assists in smooth and
effective trailer braking by powering the trailer's electric or
electric-over-hydraulic brakes with a proportional output based on the
towing vehicle's brake pressure.
The controller user interface consists of the following:
A. + and - (Gain adjustment buttons): Pressing these buttons adjusts
the controller's power output to the trailer brakes in 0.5 increments. You
can increase the gain setting to 10.0 (maximum trailer braking) or
decrease it to 0 (no trailer braking). Pressing and holding a button raises
or lowers the setting continuously. The gain setting displays in the
message center as follows: TBC GAIN = XX.X.
2013 Econoline (eco)
Owners Guide gf, 3rd Printing, May 2013
USA (fus)
Towing
A
B
161