Hard Drive Controllers - HP Z800 Specification

QuickSpecs
Supported Components
SATA Solid State Drives

Hard Drive Controllers

Factory integrated RAID on motherboard for SATA drives
RAID 0 Configuration - Striped Array
RAID 0 Data Configuration -- Boot/OS Drive + 2 Drive
Striped Array
RAID 1 Configuration - Mirrored Array
RAID 10 Configuration - Striped/Mirrored Array
RAID 5 Configuration - Parity Array
Integrated SATA 3.0 Gb/s Controller
Integrated SATA 3.0 Gb/s Controller
Integrated LSI SAS 1068E Controller with RAID 0, 1, 1E/10E
Integrated LSI SAS 1068E Controller with RAID 0 (IS),
RAID 1(IM), RAID 10(IME) capability
HP SAS Back Panel Connector kit
HP SAS Back Panel Connector kit
HP SAS Back Panel Bulkhead Connector Kit
HP SAS Back Panel Bulkhead Connector Kit
LSI MegaRAID® 9260-8i SAS 6Gb/s ROC RAID Card and iBBU08 Battery Backup Unit
LSI MegaRAID® 9260-8i SAS 6Gb/s ROC RAID Card
Up to 5 SATA drives, 5 SAS, drives, or 6 SATA 2.5", Small Form Factor (SFF) drives
If 1st drive is SATA, 2nd drive can be EITHER SATA or SAS
3TB drive is not supported as a boot device.
3TB drives are ONLY supported in positions 2, 3, 4 and 5.
3TB drives must use LSI9260 Controller.
3TB drives are ONLY supported through HP specials and are not standard CTO devices.
HP Solid State Drives for Workstations
HP 300GB SATA SSD
HP 160GB SATA SSD
HP 256GB SATA SSD
HP 128GB SATA SSD
DA - 13278 North America — Version 56 — November 21, 2013
HP Z800 Workstation
Y Y
Y Y
Y Y
Y Y
Factory
Configured Option Kit Part Number
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
Y Y
LZ069AA
LZ704AA
A3D26AA
A3D25AA
Option Kit Support
Notes
See note 1
See note 2
See note 3
See note 4
Must have 4
or fewer SAS
hard drives to
configure this
option
HP SAS Back
Panel
Connector kit
required.
Internal SAS
HD drives are
not
supported
WE465AA
Page 8