HP ProLiant DL385p Specification page 48
Hp proliant dl385p generation 8 (gen8)
Hide thumbs
Also See for ProLiant DL385p:
- Reference manual (112 pages) ,
- User manual (140 pages) ,
- Maintenance and service manual (102 pages)
Table of Contents
Advertisement
QuickSpecs
Additional Options
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13475_div/13475_div.html
(Worldwide)
HP IP Console Switch G2 with Virtual Media & CAC
HP 1x4 USB/PS2 KVM Console Switch
HP 1x1Ex8 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 2x1Ex16 KVM IP Console Switch G2 with Virtual Media CAC Software
HP 4x1Ex32 KVM IP Console Switch G2 with Virtual Media CAC Software
NOTE: Please see the QuickSpecs for Technical Specifications and additional
information:
http://h18000.www1.hp.com/products/quickspecs/13474_div/13474_div.html
(Worldwide)
Rail Kits
NOTE: Rail kits are optional for Gen8 and are no longer included standard with the
server(except pre-configured/BTO Models). The customer has the choice to not include
rail kits with their server purchase, but it is recommended.
NOTE: HP 2U Ball Bearing Rail Kits provide full serviceability of the server while in the
Rack and include a CMA. HP 2U Friction Rail Kits ARE NOT serviceable in the Rack and
must be removed from the rack and do not include CMA.
NOTE: The HP 1U Gen8 Cable Management Arm is not available when using Friction
Rails. To assist in the installation of the server into the rack an optional installation tool
is available by contacting your local services representative (p/n 695539-001).
Caution: HP recommends that a minimum of two people are required for all Rack
Server installations. Please refer to your installation instructions for proper tools and
number of people to use for any installation.
HP 2U Large Form Factor Ball Bearing Gen8 Rail Kit with CMA
NOTE: HP 2U Ball Bearing Rail Kits provide full serviceability of the server while in the
Rack and include a CMA. HP 2U Friction Rail Kits ARE NOT serviceable in the Rack and
must be removed from the rack and do not include CMA.
HP 2U Small Form Factor Ball Bearing Gen8 Rail Kit with CMA
NOTE: HP 2U Ball Bearing Rail Kits provide full serviceability of the server while in the
Rack and include a CMA. HP 2U Friction Rail Kits ARE NOT serviceable in the Rack and
must be removed from the rack and do not include CMA.
DA - 14329 Worldwide — Version 25 — December 13, 2013
HP ProLiant DL385p Generation 8 (Gen8)
AF611A
AF620A
AF621A
AF622A
663480-B21
663478-B21
Page 48
Advertisement
Table of Contents
