Rings To Answer; Using Toll Saver; Security Code - GE 27958B User Manual

1. Press the FLASH/PROGRAM button until SET CONTRAST shows in the
display. " 1 " is the default setting.
2. Press 1, 2 or 3 on the base touch-tone pad to enter your selection, or use the
MESSAGES/CID (
3. Press FLASH/PROGRAM again to store your selection.
NOTE: You can press FLASH/PROGRAM at any time to go to the next option.
R A
INGS TO NSWER
NOTE: This setting may only be made with the base.
You may set the number of times you want the phone to ring before the
answering system answers a call.
1. Press the FLASH/PROGRAM button until RING TO ANSWER shows in the
display. " 5 " is the default setting.
2. Press 3 or 5 or use the MESSAGES/CID (
or TOLL .
NOTE: TOLL (Toll Saver) can save you the cost of a toll call when accessing
your messages from another phone. If you have new messages, the unit
answers after the 3rd ring. If you have no new messages, the unit answers after
the 5th ring. You can hang up after the 3rd or 4th ring and save the pay
telephone or long distance charge.
3. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone.
S C
ECURITY ODE
NOTE: This setting may only be made with the base.
You can access the answering system from any tone dialing telephone in
another location. The security code is required for remote access, and it
prevents unauthorized access to your answering system. You may only
change the security code at the base.
1. Press the FLASH/PROGRAM button until SECURITY CODE shows in
the display.
12
or ) button on the base to scroll to your selection.
) button to scroll to 3, 5
or