Erasing Messages; Leaving A Memo; Ull - GE 27958B User Manual

• Press the PLAY/STOP button to stop the message playback.
• Press and release the MESSAGES/CID (
message; continue to press and release the MESSAGES/CID (
to go to previous messages.
• Press and release the MESSAGES/CID (
next message.
• Press the PLAY/STOP button to stop message playback.
M F
EMORY

ULL

When the memory is full, the system answers after 10 rings. You should
erase some messages so the answering system can record new messages.
E M
RASING ESSAGES
You may erase messages three ways: one message at a time using the
DELETE button on the base; all previously played messages using the
DELETE button on the base; or one message at a time using the erase
button (the 0 key) on the handset or a phone in another location.
• To erase a message that is playing, press and release PLAY/STOP and
then press and release DELETE on the base to erase the message.
• To erase all previously played messages, press and hold the DELETE
button on the base until the unit beeps.
• To erase a message from the handset:
1. Press the answer/format button on the handset.
2. Press the PLAY/STOP button on the handset (the 2 key).
3. Press erase on the handset (the 0 key) to erase the message that
is playing.
NOTE: Erased messages cannot be restored. Also, be careful not to press the
erase button as the next unheard message is playing because that message will
also be erased.
L M
EAVING A EMO
Use the memo feature to leave a message.
1. Press and hold the MEMO button (base) down until you finish the message.
34
) button to restart the current
) button to go to the
) button