Tone /Pulse; Setting Day /Time - GE 27958B User Manual

T /P
ONE ULSE
NOTE: This setting may only be made with the base.
Most telephone systems use tone dialing, however, some may still use
pulse dialing. Depending on your telephone system, set the dialing mode
as follows:
1. Press the FLASH/PROGRAM button until SET TONE/PULSE shows on the
display. The default setting is TONE .
2. Use the touch-tone pad to select 1TONE or 2 PULSE, or press the
MESSAGES/CID (
3. Press FLASH/PROGRAM again to store your selection. You will hear a
confirmation tone.
NOTE: If you aren't sure which dialing system you have, set the telephone to
tone dialing and make a test call. If the call connects, the setting is correct. If
the call does not connect, set the telephone to pulse dialing.
S D /T
ETTING AY
NOTE: This setting may only be made with the base.
Time is transmitted automatically by your local phone company as part of
Caller ID service. If you are subscribed to Caller ID service, the current time is
set automatically when you receive your first CID call. Otherwise, you can set
the time manually. The day of week is not set automatically by Caller ID. The
day of week must be set manually through base.
1. Press the FLASH/PROGRAM button until SET DAY shows in the display.
Monday is the default setting.
2. Use the MESSAGES/CID (
3. Press FLASH/PROGRAM until SET TIME shows on the display. 12:00 AM
is the default setting.
4. Use the touch-tone pad to enter the first digit of the hour, then enter the
second digit of the hour, the first digit of the minute, and the second
digit of the minute.
5. Use the MESSAGES/CID (
14
or ) button to scroll to 1TONE or 2 PULSE .
IME
or
or
) button to select the current day.
) button to scroll to AM or PM .