HP 5120 EI Series Specification page 37

QuickSpecs
Accessory Product Details
HP X120 1G SFP LC SX
Transceiver (JD118B)
A small form-factor
pluggable (SFP) Gigabit SX
transceiver that provides a
full-duplex Gigabit solution
up to 550m on a Multimode
fiber.
HP X120 1G SFP LC LX
Transceiver (JD119B)
A small form-factor
pluggable (SFP) Gigabig LX
transceiver that provides a
full duplex Gigabit solution
up to 550m on MMF or
10Km on SMF
Ports
Connectivity
Physical characteristics
Electrical characteristics Power consumption
Cabling
Services
Ports
Connectivity
Physical characteristics
Electrical characteristics Power consumption
Cabling
Services
DA - 13850 North America — Version 24 — December 17, 2013
1 LC 1000BASE-SX port
Connector type
Wavelength
Dimensions
Full configuration weight 0.04 lb. (0.02 kg)
typical
Power consumption
maximum
Maximum distance:
• FDDI Grade distance = 220m
• OM1 = 275m
• OM2 = 500m
• OM3 = Not Specified by standard
Cable length
Fiber type
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
1 SFP 1000BASE-LX port (IEEE 802.3z Type 1000BASE-LX)
Connector type
Wavelength
Dimensions
Full configuration weight 0.04 lb. (0.02 kg)
typical
Power consumption
maximum
Cable type:
Either single mode or multimode;
Maximum distance:
• 550m for Multimode
• 10km for Singlemode
Fiber type
Refer to the HP website at:
the service-level descriptions and product numbers. For details about services
and response times in your area, please contact your local HP sales office.
HP 5120 EI Switch Series
LC
850 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
0.8 W
1.0 W
up to 550m
Multi Mode
www.hp.com/networking/services
LC
1300 nm
2.17(d) x 0.6(w) x 0.46(h) in. (5.51 x 1.52 x 1.17
cm)
0.8 W
1.0 W
Both
www.hp.com/networking/services
for details on
for details on
Page 37