HP 5120 EI Series Specification page 26

QuickSpecs
Technical Specifications
HP 5120-24G EI Switch (JE066A)
Ports
Physical characteristics
Memory and processor
Mounting
Performance
Environment
Electrical characteristics Maximum heat
(HS686E)
4-year, 24x7 software phone support, software updates + 4 hour Hardware Exchange (HS687E)
5-year, 24x7 software phone support, software updates + Next Business Day Hardware Exchange
(HS688E)
Refer to the HP website at:
and product numbers. For details about services and response times in your area, please contact your local
HP sales office.
24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only
4 dual-personality ports; auto-sensing 10/100/1000Base-T or SFP
1 RJ-45 serial console port
Dimensions
Weight
128 MB SDRAM, 16 MB flash; packet buffer size: 2 MB
Mounts in an EIA-standard 19 in. telco rack or equipment cabinet (hardware included)
1000 Mb Latency
Throughput
Routing/Switching
capacity
Routing table size
Operating temperature
Operating relative
humidity
Nonoperating/Storage
temperature
Nonoperating/Storage
relative humidity
Acoustic
dissipation
Voltage
Idle power
Maximum power rating
Frequency
Notes
DA - 13850 North America — Version 24 — December 17, 2013
www.hp.com/networking/services
17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.36 cm) (1U height)
9.92 lb. (4.5 kg)
< 3.2 µs
35.7 million pps
48 Gbps
32 entries (IPv4)
32°F to 113°F (0°C to 45°C)
10% to 90%, noncondensing
-40°F to 158°F (-40°C to 70°C)
5% to 95%, noncondensing
ISO 7779
212 BTU/hr (223.66 kJ/hr)
100-240 VAC
35 W
62 W
50/60 Hz
Idle power is the actual power consumption of the device with no ports
connected.
Maximum power rating and maximum heat dissipation are the worst-case
theoretical maximum numbers provided for planning the infrastructure with
fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all
modules populated.
HP 5120 EI Switch Series
for details on the service-level descriptions
Page 26