HP 7500 Quickspecs page 14

QuickSpecs
Configuration
Note 1 Only supported on the JD242x and JD243x.
Note 2 Only supported on the JD238x,JD239x,JD241x, JD240x, JG507A, JG508A, and JG509A.
Note 3 If 2 power supplies are selected they must be the same Sku number.
Note 4 Localization required on orders without #B2B, #B2C, #B2D or #B2E options.
Note 5 If CTO Switch Chassis is ordered #0D1 (Rack Integrated), Then #B2B, or #B2C is Required on
the Power Supply's. (Optional when Switch is not Factory Racked. See Drop down remark in
Power Supplies section.)
Note 6 If the CTO Switch Chassis is ordered #0D1 (Rack Integrated), Then #B2D is Required on the
Power Supply's. (Optional when Switch is not Factory Racked. See Drop down remark in
Power Supplies section.)
Remarks:
Drop down under power supply should offer the following options and results:
Switch to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C
ROW. (Watson Default B2B or B2C for Rack Level CTO)
Switch to Wall Power Cord - Localized Option (Watson Default for BTO and Box Level CTO)
High Volt Power Electrical Module to Wall Power Cord - #B2E Option. (Offered only in North
America, Mexico, Taiwan, and Japan)
Modules
Ethernet Modules
(Switch JD243x and JD242x ) System (std 0 // max 2) User Selection (min 0 // max 2) per enclosure
(Switch JG507A) System (std 1 // max 2) User Selection (min 0 // max 1) per enclosure
(Switch JD240x) System (std 0 // max 3) User Selection (min 0 // max 3) per enclosure
(Switch JD239x and JD241x ) System (std 0 // max 6) User Selection (min 0 // max 6) per enclosure
(Switch JG508A) System (std 2 // max 6) User Selection (min 0 // max 4) per enclosure
(Switch JD238x) System (std 0 // max 10) User Selection (min 0 // max 10) per enclosure
(Switch JG509A) System (std 2 // max 10) User Selection (min 0 // max 8) per enclosure
HP 7500 12-port GbE SFP Adv Module
min=0 \ max=12 SFP Transceivers
DA - 13805 North America — Version 29 — December 9, 2013
HP 7500 Switch Series
JD202A
See Configuration
Note:1
Page 14