4.
Installation
-
Take your frame and its accessories out of their packaging.
-
Remove the plastic film protecting the front of the frame.
-
Pull the plastic tab protecting the contacts in the remote control.
-
Stand the frame in the desired location, pulling the adjustable stand towards you
(see diagram above).
-
Connect the electrical cord to the frame in the space provided.
-
Plug your frame into an outlet. Your frame will start up automatically.
II.
U se your frame
1 B
1.
Selecting a language
During the first use, the animated demo is played. To exit and go to
the frame functions, simply press the SETUP key on the remote.
The language selection screen then appears.
-
Select your language using the arrow keys on the
remote control, then press ENTER.
Once you have selected your language, the frame is ready for use.
Simply insert a memory card or flash drive to begin playback of your
pictures.
Caution: The animated demo is located in the folder named "DEMO". You must delete it for the frame to
keep benefit of the 2 GB internal memory.
2.
"ECO LOGIC" mode
ECO LOGIC mode combines 3 essential elements to reduce energy consumption by over 40% compared
to a standard frame:
-
A LED screen, which uses less energy while improving picture quality;
-
A low-energy and 'Energy Star'-certified power adapter;
-
A light sensor.
This sensor, on by default, will automatically turn off your picture frame at night and turn it on during the day.
You can deactivate the light sensor in your frame's system settings menu.
4
Non contractual document subject to change in case of typographical errors (Mktg0810)
The manufacturer reserves the right to modify the product specifications without notice.
COPYRIGHT SOPEG 2010