Remote Control; Installation; Use Your Frame; Selecting A Language - Telefunken DPF 9323 Instruction Manual

Remote control

All functions can be accessed with the remote control. Press the following keys to access the functions:
Key Function
▲
Navigation up in the menus
◄
Navigation left in the menus and skip to the previous file
▼
Navigation down in the menus
►
Navigation right in the menus and skip to the next file
ENTER Confirm your selection or switch modes
Switch the digital photo frame on or to standby mode
EXIT Exit current menu and return to previous menu
STOP Stop file playback and return to main menu
Access copy, delete and sort functions (only in main menu)
(COPY/DEL)
Rotate photo clockwise 90°
(ROTATE)
Enlarge image, press repeatedly to cycle through zoom modes x2, x4, x8 and x16;
press again to return to normal size
Start the photo slideshow directly
(SLIDESHOW)
SETUP Access setup menu (Settings) directly

4. Installation

- Take your frame and its accessories out of their packaging.
- Remove the plastic film protecting the front of the frame.
- Pull the plastic tab protecting the contacts in the remote control.
- Stand the frame in the desired location, pulling the adjustable stand towards you (see diagram
above).
- Connect the electrical cord to the frame in the space provided.
- Plug your frame into an outlet. Your frame will start up automatically.
II.

Use your frame

1. Selecting a language

During its first use, the frame will display an initial screen allowing you to
choose the language.
- Select your language using the arrow keys on the remote control,
then press "Enter".
Once you have selected your language, your frame will begin to read the
photos contained in its internal memory.
Non contractual document subject to change in case of typographical errors (Mktg1011) COPYRIGHT SOPEG 2011
3