Table of Contents
Advertisement
Caution: Depending on where you place the frame (for example, in furniture or under a shelf), there may not
be enough light to turn on the frame or it may unexpectedly turn off. To reactivate it, simply bring into bright
light for 2-3 seconds.
3.
Reading a memory card or a USB key
If your frame is off:
-
Insert your card or USB key in the space provided.
-
Switch on your frame: The slideshow will automatically play the contents of your memory card
or USB key.
If your frame is on and playing the slideshow from the internal memory:
-
Your memory card is not automatically detected.
1. Press EXIT to exit the slideshow, the thumbnails will appear.
2. Press EXIT again to exit the internal memory and return to
the Photo menu.
3. Press ▼ to highlight USB or inserted memory card and
press ENTER to display the thumbnails on the media.
4. Press ENTER to display the selected photo in full screen
mode.
5. Repeatedly press ENTER to choose between Single, Slide with music and Slide photo only modes.
6. Press EXIT to exit the slideshow, the thumbnails will appear.
III.
S electing the type of files to play
2 B
1.
Internal memory/Removable media
If no media has been inserted, the slideshow from the internal memory will launch automatically whenever
the frame is turned on.
If there is a memory card or a flash drive inserted when the frame is turned on, the card's content will be
played. In this case, you can switch between the card and the internal memory as follows:
-
Keep pressing EXIT on your remote to go to the select media screen.
Press ▲/▼ on the remote to select the media you want to play.
-
-
Press ENTER to confirm.
Non contractual document subject to change in case of typographical errors (Mktg0810)
The manufacturer reserves the right to modify the product specifications without notice.
COPYRIGHT SOPEG 2010
5
Advertisement
Table of Contents
