Telefunken Digicadre 8001 User Manual page 42

Be careful when connecting the power supply cable; this should not be leaned on or in
contact with other objects. Do not place the lead under a carpet. Check the lead's
condition regularly to avoid any damages. If the lead is damaged, disconnect it and
replace it.
Ventilation
The memory card slots and the device openings are used for frame ventilation.
To ensure optimal use of the frame and to prevent any overheating, these openings
should not be obstructed or covered.
Keep the digital frame at a sufficient distance from the wall to ensure ventilation. Do not
place the digital photo frame on a bed or couch, so that any overheating can be avoided.
Warning!
Never remove the plastic housing found at the back of the frame. The digital photo frame
is made up of electric circuits and they can injure you if touched.
Do not try to repair your digital frame alone.
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
43