Display Duration Of The Photos - Telefunken Digicadre 8001 User Manual

You can adjust the display duration of your slide-shows images with 5 different
possibilities (3s, 5s, 10s, 30s, 60s). The default is 3s.
When the frame is in slide show mode and photos are being displayed, press the remote
control's EXIT button once to leave the slide show, and then press SETUP. The menu is
displayed. Using the remote control's UP/DOWN buttons, highlight the "display time" line,
and then press ENTER. The different durations appear (fig. 9).
Select the desired duration using the UP/DOWN buttons, and then press ENTER to
confirm your choice. Next press EXIT to leave the menu, and then ENTER to launch the
slide show again.
Fig.9
When the frame is in slide show mode and photos are being displayed, press
the slide show, then press second time for 3 seconds.
4. Display duration of photos
With the remote control
With the frame
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
20
to leave