Colour Adjustment - Telefunken Digicadre 8001 User Manual

Fig.21
- +
C
Fig.22
With the frame
Press and then then press second time for 3 seconds.
The menu is displayed (fig.19). Highlight "Contrast" using the
. An adjustable contrast bar is displayed on the screen (fig.20).
Press the arrows to adjust the contrast. Next press
to launch the slide-show again.
i. Colour
With the remote control
Press the remote control's EXIT button and then press SETUP.
The menu is displayed (fig.21). Highlight "Colour" using the UP/DOWN arrows and then
press ENTER. An adjustable colour bar is displayed on screen (fig.22).
Press the RIGHT/LEFT keys to adjust the colour. Next press EXIT twice followed by
"slide show" to launch the slide show again.
keys and then press
twice, followed by
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
35
twice