Telefunken Digicadre 8001 User Manual page 18

When the frame is in slide-show mode and photos are being displayed, press the remote
control's EXIT button once to leave the slide-show, and then press SETUP. The menu is
displayed.
Using the remote control's UP/DOWN buttons, highlight the "transition effects" line, and
the press ENTER. The different transitions appear on screen (fig. 8).
Select the desired transition using the UP/DOWN buttons, and then press ENTER to
confirm. Press EXIT to leave the menu, and then ENTER to launch the slide-show again.
When the frame is in slide-show mode and photos are being displayed, press the
Fig.8
button to leave the slide show, then press second time for 3 seconds. Using the
buttons, highlight the "transition effects" line, and then press
are displayed (fig. 8). Select the desired transition using the
Press
With the remote control
With the frame
to confirm your choice.
to leave the menu, and then press
. The different transitions
buttons, and then press
to launch the slide-show again.
Non binding document, subject to modification in the event
of misprint(s) – MKG0207
19