Supported Configurations - HP 571956-B21 Specification

QuickSpecs
Supported Products

Supported Configurations

1. Upper Fan System
2. Interconnect Bays 1 /2
3. Interconnect Bays 3 / 4
4. Interconnect Bays 5 / 6
Mezzanines
c7000 Port Mapping
Recommended HP Smart Update Firmware:
HP Smart Update Firmware-HP Integrity BL860c/870c/890c i2 System Firmware Bundle for
Linux/Windows, 44.01
To access latest HP Smart Update Firmware, click here:
http://h18004.www1.hp.com/products/blades/integrity-release-sets.html
HP Integrity i2 Server Blades
HP Smart Update Firmware-HP Integrity BL860c/870c/890c i2 System Firmware Bundle for
Linux/Windows, 26.36
For HP Integrity BL860c and BL870c use System Firmware 04.31
HP BladeSystem c7000 Enclosure - Rear View
Port mapping differs slightly between full height and half height server blades due to the support for
additional Mezzanine cards on the full height version.
HP has simplified the processes of mapping Mezzanine ports to switch ports by providing intelligent
management tools via the Onboard Administrator and HP Insight Manager Software. The Onboard
Administrator Guide and Enclosure Setup and Installation Guide provide detailed information on port
mapping.
DA - 13652 Worldwide — Version 20 — November 5, 2013
HP Virtual Connect FlexFabric 10Gb/24-Port Module
5. Interconnect Bays 7 / 8
6. On Board Administrator
7. Lower Fan System
8. Rear Redundant Power Complex
Page 5