HP 571956-B21 Specification page 4

QuickSpecs
Supported Products
HP BladeSystem c-Class
Enclosures
Virtual Connect Firmware Virtual Connect Firmware v4.10 is recommended with the following release sets for HP ProLiant and HP
Ethernet and Flex-10 Ethernet adapters:
HP NC325m PCI Express Quad Port 1Gb server adapter
HP NC326i Integrated Dual Port PCI Express Gigabit Server Adapter
HP NC326m PCI Express Dual Port Multifunction Gigabit Server Adapter
HP NC360m Dual Port 1GbE BL-c Adapter
HP NC364m Quad Port 1GbE BL-c Adapter
HP NC370i Dual Port Multifunction Gigabit Network Adapter
HP NC373i Dual Port Multifunction Gigabit Network Adapter
HP NC373m Dual Port Multifunction Gigabit Network Adapter
HP NC382i Integrated Dual Port PCI Express Gigabit Server Adapter
HP NC382m Integrated Dual Port PCI Express Gigabit Server Adapter
HP NC522m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
HP NC532i Dual Port Flex-10 10GbE Multifunction BL-c Adapter
HP NC532m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
HP NC542m Dual Port Flex-10 10GbE BL-c Adapter
HP NC550m 10Gb 2-port PCIe x8 Flex-10 Ethernet Adapter
HP NC522m Dual Port Flex-10 10GbE Multifunction BL-c Adapter
HP Flex-10 10Gb 2-port 530FLB Adapter
HP Flex-10 10Gb 2-port 530M Adapter
HP Flex-10 10Gb 2-port 552M Adapter
HP Ethernet 1Gb 2-port 361FLB Adapter
HP Ethernet 1Gb 4-port 366M Adapter
NOTE: Consult individual server blade QuickSpecs for specific adapter support.
NOTE: Some options listed above may be discontinued.
NOTE: For IPv6 management, Onboard Administrator version 4.00 or higher is required.
HP BladeSystem c-Class c7000 Enclosure with Onboard Administrator
NOTE: VC FlexFabric modules are not supported in BladeSystem c3000 enclosures.
Integrity environments
HP ProLiant server blades
HP Service Pack for ProLiant: Version SPP 2013.09.0 (B) or greater
The HP Service Pack for ProLiant (SPP) with HP Smart Update Manager (HP SUM) as the deployment engine
provides a comprehensive approach to firmware and system software maintenance. The SPP is a
comprehensive collection of firmware and system software components, all tested together as a single
solution stack that include drivers, agents, utilities, firmware packages for HP ProLiant servers,
controllers, storage, blades and enclosures, and other options. It is available on all supported HP ProLiant
Gen 8 servers (HP ProLiant SL/ML/DL/BL 100, 200, 300, 500, 700, 900 servers, and HP CloudSystem
Matrix) in addition to earlier generation HP ProLiant servers. The SPP is released with most major HP
ProLiant server releases
To access the latest HP Service Pack for ProLiant click here:
www.hp.com/go/server/service_packs/updates
HP Integrity i4 Server Blades
DA - 13652 Worldwide — Version 20 — November 5, 2013
HP Virtual Connect FlexFabric 10Gb/24-Port Module
Page 4