Required Power Supply Info - HP Z620 Specification

QuickSpecs
System Technical Specifications
Z620 Required Power Supply Info
Power Supply
Operating Voltage Range
Rated Voltage Range
Rated Line Frequency
Operating Line Frequency Range
Rated Input Current
Heat Dissipation
(Configuration and software dependent)
Power Supply Fan
ENERGY STAR Qualified
(Configuration dependent)
80 PLUS® Compliant
FEMP Standby Power Compliant @115V
(<2W in S5 - Power Off)
EuP Compliant @ 230V
(<0.5 W in S5 - Power Off)
CECP Compliant @ 220V
(<4W in S3 - Suspend to RAM)
Power Consumption in sleep mode
(as defined by ENERGY STAR) - Suspend to RAM (S3)
(Instantly Available PC)
Built-in Selft Test LED
Surge Tolerant Full Ranging Power Supply
(withstands power surges up to 2000V)
Access Panel Solenoid Lock Header Yes
Access Panel Intrusion Sensor
Header
Multibay Header
Integrated Gigabit Ethernet
Wake on LAN
ASF 1.0/2.0 (Alert Standard Format) No
TPM
Password Clear Header
AUX IN (audio)
Clear CMOS Button
Memory Fan Header
The Z620 800W power supply efficiency report can be found at this link:
Yes
Integrated in Front User Interface (Power Switch, Power LED, HDD LED, Speaker) Cable
No
Integrated Intel 82579 and 82574 Controllers
Yes
Integrated TPM 1.2; Infineon
Yes
No
Yes
CPU0 Memory Fan Header; CPU1 Memory Fan Header
DA - 14262 North America — Version 35 — December 12, 2013
800W 90% Efficient, Custom PSU
(Wide Ranging, Active PFC)
90–269 VAC
100–240 V
50–60 Hz
47–66 Hz
9.7 A @ 100-240 V
Typical = 1972 btu/hr (497 kcal/hr)
Maximum = 3139 btu/hr (791 kcal/hr)
92x25 mm variable speed
Yes, 90% Efficient
800P1A
Yes; Configuration dependent
<15W
HP Z620 Workstation
118 V
400 Hz
393–407 Hz
9.7 A @ 400 V
Yes
Yes
Yes
Yes
Yes
S10-
Page 24