HP Z620 Specification page 10

QuickSpecs
Supported Components
SAS Hard Drives
SATA Hard Drives
SATA Solid State Drives
for full benefits; check with software provider to determine suitability; Not all customers or software
applications will necessarily benefit from use of these technologies.
64-bit computing on Intel® 64 architecture requires a computer system with a processor, chipset, BIOS,
operating system, device drivers, and applications enabled for Intel® 64 architecture. Processor will not
operate (including 32-bit operation) without an Intel® 64 architecture-enabled BIOS. Performance will vary
depending on your hardware and software configurations. See:
information.
Intel's numbering is not a measurement of higher performance.
Z620 processor AMO kits include:
- 2nd CPU/Memory Module (riser)
- processor
- heat sink
HP SAS (Serial Attached SCSI) Hard Drives for HP Workstations
HP 300GB SAS 10K SFF HDD
HP 600GB SAS 10K SFF HDD
HP 900GB SAS 10K SFF HDD
300GB SAS 15K rpm 6Gb/s 3.5" HDD
450GB SAS 15K rpm 6Gb/s 3.5" HDD
600GB SAS 15K rpm 6Gb/s 3.5" HDD
HP 900GB SAS 10K SFF HDD
HP 1.2TB SAS 10K SFF HDD
Sub-Section Description/Notes
NOTE: SAS Controller add-in card required
SATA (Serial ATA) Hard Drives for HP Workstations
250GB SATA 7200 rpm 6Gb/s 3.5" HDD
500GB SATA 7200 rpm 6Gb/s 3.5" HDD
500GB SATA 7.2K SED SFF HDD
1TB SATA 7200 rpm 6Gb/s 3.5" HDD
2.0TB SATA 7200 rpm 6Gb/s 3.5" HDD
3.0TB SATA 7200 rpm 6Gb/s 3.5" HDD
250GB SATA 10K rpm SFF HDD
500GB SATA 10K rpm SFF HDD
1TB SATA 10K rpm SFF HDD
HP Solid State Drives (SSDs) for Workstations
HP 128GB SATA 6Gb/s SSD
HP 256GB SATA 6Gb/s SSD
HP 256GB SATA 6Gb/s SED SSD
DA - 14262 North America — Version 35 — December 12, 2013
HP Z620 Workstation
http://www.intel.com/info/em64t
Option
Factory Option Kit Part
Configured Kit Number
Y Y A2Z20AA
Y Y A2Z21AA
Y Y E2P03AA
Y Y LU967AA
Y Y LU968AA
Y Y VM647AA
Y Y E2P03AA
Y Y E2P04AA
Y Y LQ034AA
Y Y LQ036AA
Y Y D8N29AA
Y Y LQ037AA
Y Y QB576AA
Y Y QF298AA
Y Y B8X18AA
Y Y B8X19AA
Y Y B8X20AA
Y Y A3D25AA
Y Y A3D26AA
Y Y D8N28AA
for more
Support
Notes
Page 10