Hp Bladesystem C3000 Enclosure - HP 638526-B21 Specification

QuickSpecs
Supported Products

HP BladeSystem c3000 Enclosure

NOTE: The following tables show a number of typical, supported configurations for an HP BladeSystem c3000 Enclosure.
Required Cabling
NOTE: When using VC Flex-10 Modules with Flex-10 NICs on server blades, only VC Ethernet modules may
be used for Ethernet connections in the same enclosure.
[Bay 1] VC-Enet
[Bay 3] Empty
[Bay 1] VC-Enet
[Bay 3] Empty
[Bay 1] VC-Enet
[Bay 3] VC-Enet
[Bay 1] VC-Enet
[Bay 3] VC-FC
NOTE: When using VC Flex-10 Modules with Flex-10 NICs on server blades, only VC Ethernet modules may
be used for Ethernet connections in the same enclosure.
NOTE: For available cables; please see the "Options" section below of this QuickSpecs.
Maximum Distances Multimode OM1
62.5/125 micron
SR 2 - 26m/33m*
LR
LRM 0.5 - 220m
* 26m at 160MHz and 33m at 200MHz.
NOTE: For additional information on 10Gb cable specifications go to:
http://www.hewlett-packard.com/rnd/pdfs/10gig_cabling_technical_brief.pdf
DA - 14408 Worldwide — Version 8 — September 10, 2013
HP Virtual Connect Flex-10/10D Module for c-Class
[Bay 2] VC-Enet
[Bay 4] Empty
[Bay 2] Empty
[Bay 4] Empty
[Bay 2] VC-Enet
[Bay 4] VC-Enet
[Bay 2] VC-Enet
[Bay 4] VC-FC
Multimode OM2
50/125 micron
2 - 82m
0.5 - 220m
BladeSystem
Multimode OM3 Singlemode
50/125 micron 9 micron
2 - 300m
2 -10km
0.5 - 220m
Page 9