HP 638526-B21 Specification page 20

QuickSpecs
Technical Specifications
Management Features
DA - 14408 Worldwide — Version 8 — September 10, 2013
HP Virtual Connect Flex-10/10D Module for c-Class
Native VLAN support for untagged packets on a shared uplink set. Packets can
be targeted to a specific server ports.
Simultaneous tunneled and mapped VLAN connections to a single domain.
Simple and intuitive Graphical User Interface (GUI) for defining, configuring,
and managing all elements of the Virtual Connect Domain.
Setup Wizards for server profile creation and initial domain installation and
configuration and network configuration.
Comprehensive administration, definition, and management of Ethernet
Network, Shared Uplink Set, and Server Profiles
Embedded SNMP v1, v2 and SMI-S agents allow Network Management
applications to query Virtual Connect for statistics and trap information.
A robust, scriptable and secure Command Line Interface simplifies
management and enables macros to control common Virtual Connect tasks
Any uplink port can be used as a dedicated mirrored port for traffic analysis
and troubleshooting by a Network Analyzer or Sniffer.
Domain Management of user accounts, enclosure, Virtual Connect domain
settings, and firmware updates
The location and status of Virtual Connect Modules in the HP c-Class Enclosure
and Onboard Administrator can be viewed from the Hardware Status page.
Including at-a-glance detailed information of the hardware elements via
mouse-over pop-up windows.
MAC Address Administration allows local administration of predefined or user-
defined MAC address ranges.
VC manager runs as a high-availability pair when a partner module is installed
in the adjacent bay. All configuration data is stored in flash memory and
checkpointed to the standby module. Configurations can also be backed up to
a workstation via the GUI.
Up to 128 Network Access Groups can be defined to prevent enabling specific
network combinations in the same server profile
Supported by HP Virtual Connect Enterprise Management v7.2.2 and higher.
Provides centralized network connection management and workload mobility
for thousands of servers. Learn more at:
BladeSystem
www.hp.com/go/vcem
Page 20