Technical Specifications - HP 638526-B21 Specification

QuickSpecs

Technical Specifications

Shipping Dimensions
Shipping Weight
Product Specifications
Hardware
Length
Width
Height
Performance
Connectors and Cabling
Indicators
Dimensions
Weight
Environmental Ranges
* All temperature ratings shown are for sea level. An altitude derating of 1°C per 304.8 m (1.8°F per 1,000
ft) to 3048 m (10,000 ft) is applicable. No direct sunlight allowed. Upper operating limit is 3,048m (10,000
ft) or 70 Kpa/10.1 psia. Upper non-operating limit is 9,144 m (30,000 ft) or 30.3 KPa/4.4 psia.
** Storage maximum humidity of 95% is based on a maximum temperature of 45°C (113°F). Altitude
maximum for storage corresponds to a pressure minimum of 70 KPa.
Power Specification
DA - 14408 Worldwide — Version 8 — September 10, 2013
HP Virtual Connect Flex-10/10D Module for c-Class
13.88 in (352.55 mm)
10.63 in (270.00 mm)
4.75 in (120.65 mm)
4.4 lbs (2.0 kg)
Line Rate, full-duplex 600Gbps bridging fabric
Non-blocking architecture
Maximum transmission unit (MTU) of up to 9216 bytes (jumbo frames)
16 x 10Gb downlinks midplane
4x 10Gb cross connect
10 x 10Gb SR, LR, or LRM fiber uplinks SFP+
Ethernet and RS-232 internal interface to c-Class Onboard Administrator
Module
Recessed Momentary Reset Switch
Momentary Next/Step Switch
Backlit port number and status indicator LED, one per bulkhead port,
blue/amber/green
Module status indicator, amber/green
Module locator (UID), blue
Link indicator, one per SFP+-port, green/amber
Length
Width
Height
1.27Kg (2.8 Lbs)
Temperature Range
Specification
Temperature Range*
Operating
Shipping
Storage
Maximum wet bulb
temperature
Relative Humidity
(noncondensing)**
Operating
Shipping
Storage
12V @ 5.83A (70W
10.5 in (267.7 mm)
7.5 in (92.79 mm)
1.1 in (27.94 mm)
10C to 35C (50F to 95F)
10C to 35C (50F to 95F)
Shipping -40C to 60C (-40F to 140F)
-20°C to 60°C (-4F to 140°F)
30C (80F)
10% to 90%
10% to 90%
10% to 95%
BladeSystem
Page 18