Table of Contents
Advertisement
QuickSpecs
Standard Features
Product Features
Dual-port 10 Gigabit
Ethernet Throughput
PCI Express Interface
Jumbo Frames
TCP/IP Stateless
Offloading
MSI and MSI-X
802.1Q VLANs
Industry-leading throughput and latency performance
Up to 40Gb/s bi-directional near line rate throughput
Hardware acceleration TCP/IP/UDP stateless intelligent offloads
No firmware updates required - less management and downtime
Low profile design shipping with standard height and low-profile brackets
Supports SR-IOV (requires server FW, SW and OS support)
PXE, Jumbo Frames, Checksum & Segmentation Offload, IPv6 and RSS
On chip temperature monitor
Standard server operating system support
Standard NC series option kit warranty, support, services
Field replaceable and upgradeable
Support for Preboot eXecution Environment (PXE)
Integrated PHY and MAC
IEEE 1588 (Time Synchronization)
The HP 560SFP+ Adapter delivers 20 Gbps full duplex Ethernet transfer rate per port (40 Gbps per
adapter), providing the network performance needed to improve response times and alleviate bottlenecks
that impact performance of next generation data centers. 10Gb Ethernet bandwidth is ideal for high
performance computing, database clusters, video on demand and more.
The HP 560SFP+ Adapter is designed with an eight lane (x8) PCI Express bus based on the PCIe v2.0
standard. The adapter is backward compatible with four lane (x4) PCI Express, automatically auto-sensing
between x8 and x4 slots.
The HP 560SFP+ Adapter supports jumbo frames (also known as extended frames), permitting up to a 9K
byte (KB) transmission unit (MTU) when running Ethernet I/O traffic. This is over 5X the size of a standard
1500-byte Ethernet frame. With jumbo frames, networks can achieve higher throughput performance and
greater CPU utilization. These attributes are particularly useful for database transfer and tape backup
operations.
TCP, IP, UDP checksum offload, Large Send Offload (LSO), TCP, Segmentation Offload (TSO). These
features optimize host efficiency, leaving the CPU available for other duties.
The HP 560SFP+ Adapter powered by Intel® 82599 controller offers TCP/IP stateless intelligent offloading
capability.
Message Signaled Interrupt (Extended) provides performance benefits for multi-core servers by load
balancing interrupts between CPUs/cores. The HP 560SFP+ Adapter supports MSI and MSI-X.
IEEE 802.1Q virtual local area network (VLAN) protocol allows each physical port of the HP 560SFP+
adapter to be separated into multiple virtual NICs for added network segmentation and enhanced security
and performance. VLANs increase security by isolating traffic between users. Limiting the broadcast traffic
to within the same VLAN domain also improves performance. The HP 560SFP+ Adapter provides support
for 802.1Q (VLAN).
DA - 14403 North America — Version 13 — November 7, 2013
HP Ethernet 10Gb 2-port 560SFP+ Adapter
Page 3
Advertisement
Table of Contents
