Remote Management - NETGEAR N300 User Manual

9. Click Apply to add the static route.

Remote Management

The remote management feature lets you upgrade or check the status of your JWNR2000v3
router over the Internet.
Note: Be sure to change the router's default login password to a secure
password. The ideal password contains no dictionary words from any language
and contains uppercase and lowercase letters, numbers, and symbols. It can
be up to 30 characters.
To set up remote management:

1. Select ADVANCED > Advanced Setup > Remote Management.
2. Select the Turn Remote Management On check box.
3. In the Allow Remote Access By section, specify the external IP addresses to be allowed to
access the router's remote management, as follows:
• To allow access from a single IP address on the Internet, select Only This
Computer. Enter the IP address that will be allowed access.
• To allow access from a range of IP addresses on the Internet, select IP Address
Range. Enter a beginning and ending IP address to define the allowed range.
• To allow access from any IP address on the Internet, select Everyone.
Note: For enhanced security, restrict access to as few external IP addresses
as practical.
4. Specify the port number for accessing the web management interface.
N300 Wireless Router JWNR2000v3
Advanced Settings
93