NETGEAR N300 User Manual page 27

If you change your preset security settings, make a note of the new settings and store it in a
safe place where you can easily find it.
If you use a wireless computer to change the wireless network name (SSID) or other wireless
security settings, you are disconnected when you click Apply. To avoid this problem, use a
computer with a wired connection to access the router.
To view or change basic wireless settings:

1. From the BASIC Home screen, select Wireless.
The following screen displays:
The Wireless Settings screen sections, settings, and procedures are explained in the
following sections.
2. Make any changes that are needed.
3. Click Apply.
Your settings are saved.
4. Set up and test your wireless devices and computers to make sure that they can connect
wirelessly.
If they do not, check the following:
• Is your wireless device or computer connected to your network or another wireless
network in your area? Some wireless devices automatically connect to the first open
network (without wireless security) that they discover.
• Does your wireless device or computer show up on the Attached Devices screen? If it
does, then it is connected to the network.
• If you are not sure what the network name (SSID) or password is, look on the label on
the bottom of your router.
N300 Wireless Router JWNR2000v3
NETGEAR genie Basic Settings
27