Probe Type - Fluke 721 User Manual

721
Users Manual

PROBE TYPE

To select an external RTD probe for use with the Product:
1. Push  to access the menus.
2. Push  to step through the menu until PROBE is
shown on the menu bar.
3. Push  on to select the Probe type. The probe
choices are:
P100-385
P100-392
P100-JIS
22
4. Push  to select the necessary probe type (see the
figure below). Push  to store the change and go to
the Main Menu.
The default probe type is PT100-385.
SELECT RTD PROBE TYPE
hix035.eps
5. Connect the RTD Probe.
Note
hix036.eps