Dialing Acid Number - GE 21025/26 User Manual

D CID N
IALING A
While reviewing Caller ID records, you may dial the phone number
showing in the display.
1. Make sure the phone is OFF (not in talk mode).
2. Press cid/vol (
displayed. Depending on (a) how the incoming phone number was
formatted when it was received, and (b) whether or not you previously
pre-programmed your local area code into memory, you may need to
adjust the format of the incoming caller 's stored phone number before
dialing it back. The format button lets you change the format of the
displayed number.
Available formats include:
Number of digits
Eleven digits
Ten digits
Seven digits
NOTE: If the incoming number is a Direct Dial Number, it is supplied by your
local phone company, and you may not adjust its format. When you press the
format/conference button on handset PRESS TALK KEY displays. Press the
talk/callback button on handset to dial the number.
3. If the number does not dial as shown, press the format/conference
button on handset. Repeat if necessary, until the correct number of
digits show in the display.
UMBER
or ) button on the until the desired CID record is
Explanation
long distance code "1 "
+3- digit area code +7-digit
telephone number.
3-digit area code +7-digit
telephone number.
7-digit telephone number.
Example
1-317-888-8888
317-888-8888
888-8888
37