Storing Cid Records In Storing A Redial Number Dialing Acid Number; Ormat - GE 25893 User Manual

3. Press any number key (0-9) to store the phone number in that
memory location.
4. Press memory and ENTER NAME shows on the display.
5. Use the handset number pad to enter the name, then press memory and
ENTER TEL NUMBR shows on the display.
6. Press redial to display the redial number and name.
7. Press memory again to confirm.
NOTE: If the redial number has more than 24 digits, the redial number
cannot be stored in memory.
To replace an old redial number stored in a memory location with a new
redial number:
1. Repeat steps 1 through 5, then press redial to display the new redial
number and name.
2. Press memory again and the new redial number replaces the old redial
number in that memory location.
D CID N
IALING A
1. Make sure the phone is OFF (not in TALK mode).
2. Use the CID/VOL left (-) or right (+) arrow button to display the desired
Caller ID record.
3. Press the TALK/callback button to dial the number.
C
HANGING THE
The FORMAT button lets you change the format of the displayed number.
The available formats are as follows.
7-digit
10-digit
11-digit
1. Make sure the phone is OFF (not in TALK mode).
2. Use the CID/VOL left (-) or right (+) arrow button to scroll to the number
you want to call back.
UMBER
N F
UMBER

ORMAT

7-digit telephone number.
3-digit area code + 7-digit telephone number.
long distance code "1" + 3-digit area code + 7-digit
telephone number.
21