GE 21025/26 User Manual page 52

• Make sure the battery pack is installed correctly.
• Did the handset beep when you pressed the talk/callback button? Did
the charge indicator on the base turn on? The battery may need to be
charged.
• Place handset in cradle for at least 20 seconds to reset.
Dial tone is OK but can't dial out
• Make sure the TONE/PULSE setting on the base is set to the type of
phone service you are subscribed to.
Handset does not ring
• Make sure the handset ringer setting is ON.
• The cordless handset may be out of range of the base. Move closer to
the base.
• You may have too many extension phones on your line. Try unplugging
some phones.
• Check for dial tone.
You experience static, noise, or fading in and out
• The cordless handset may be out of range of the base. Move closer to
the base.
• Relocate the base. Make sure base is not plugged into an outlet with
another household appliance.
• Charge the battery.
Unit beeps
• Place the handset in the cradle for 20 seconds. If it still beeps, charge
battery for 16 hours.
• Clean charging contacts on cordless handset and base/charge cradle
with a soft cloth or an eraser.
• See solutions for "No dial tone. "
• Replace the battery.
52