Table of Contents
Advertisement
Adaptec SCSI Card 29160 User's Reference
If Windows 95/98 does not detect the Adaptec SCSI Card 29160, get
the driver disk or CD included with the SCSI card and run the Add
New Hardware Wizard again:
1
Double-click the Add New Hardware icon in Control Panel.
2
Click Next to begin installing your new hardware.
3
Select No and click Next to select the type of hardware you
want to install.
4
Select SCSI controllers and click Next.
Note:
The 29160 will not appear on the Models list
when Adaptec is selected from the Manufacturers list.
5
Click Have Disk... and follow the directions that appear on the
screen to install the driver software.
6
Select 29160, 29160N, 29160B, CPQ29160, Ultra160 PCI SCSI
Controller.
How can I check the status of a resource such as IRQ, Memory, or I/O?
1
Right click on My Computer.
2
Select Properties from the menu.
3
Click the Device Manager tab.
4
Double-click the Computer icon.
5
On the View Resources tab, click the option button for the type
of resource you want to check:
Interrupt Request (IRQ)
Input/Output Address (I/O)
Direct Memory Access (DMA)
Memory
6
The setting, and the hardware using the setting, are displayed.
If a specific resource is not listed, the resource is not used
by a device.
If a resource is listed more than once, the resource is used
by more than one device.
8
Advertisement
Table of Contents
Troubleshooting
