Adaptec 1821900 Reference page 13

4 Double-click the SCSI Controller icon. The software driver for
the Adaptec SCSI Card 29160 is listed as 29160, 29160N,
29160B, CPQ29160, Ultra160 PCI SCSI Controller.
If the driver is listed, the Adaptec SCSI Card 29160 driver is
loading properly.
If the driver is listed but has an exclamation mark inside a
yellow circle the software driver may conflict with other
hardware using the same resources. Double-click the icon
to see the device status and possible solutions.
If the driver is listed but has an "X" inside a red circle, the
Adaptec SCSI Card 29160 software driver is disabled and
isn't loading.
If the SCSI Controller icon or the Adaptec SCSI Card 29160
software driver is not listed, reinstall the driver that was
included with the SCSI card.
An "X" inside a red circle appears with the Adaptec SCSI Card 29160
software driver in Device Manager. What does this mean?
It means that the Adaptec SCSI Card 29160 software driver is dis-
abled and isn't loading.
To enable the driver
1 Double-click the Adaptec SCSI Card 29160 software driver in
Device Manager.
2 Under the General tab, click the Original Configuration (cur-
rent) box.
What if there is no SCSI Controller icon under Device Manager, or the
software driver for the Adaptec SCSI Card 29160 does not appear
under Device Manager?
If the SCSI Controller icon or the software driver do not appear
1 Double-click the Add New Hardware icon in Control Panel.
2 Click Next to begin installing your new hardware.
3 Select Yes (recommended) and click Next to have Windows
search for the Adaptec SCSI Card 29160.
4 Follow the on-screen instructions.
Troubleshooting
7