Table 35: Jumper Positions For Capacity Clip To 32Gb; Table 36: Jumper Settings For Disabling Auto Spin - Hitachi HDT725025VLA380 - Deskstar 0A33423 T7K500 250GB SATA 7200RPM 8MB Cache Hard Drive Specifications

7.1.4.3 Capacity clip to 32GB
The figure below shows the jumper positions used to select Device 0, Device 1, Cable Selection, or Device1
(Slave) Present while setting the drive capacity down to 32 GB for the purpose of compatibility.

Table 35: Jumper positions for capacity clip to 32GB

Note: The jumper setting acts as a 32GB clip which clips the LBA to 66055248. The CHS is unchanged from the
factory default of 16383/16/63.
7.1.4.4 Power up in Standby
The figure below shows the jumper positions used to select Device 0, Device 1, Cable Selection, or Device1
(Slave) Present to enable Power Up In Standby.

Table 36: Jumper settings for Disabling Auto Spin

I G E C
H F D
I
G E C
H F D
I G E C
H F D
I
G E C
H F D
I G E C
H F D
I
G E C
H F D
I G E C
H F D
I G E C
H F D
Deskstar T7K500 Hard Disk Drive Specification
A
DEVICE 0 (M aster)
B
A
DEVICE 1 (Slave)
B
A
CABLE SEL
B
A
DEVICE 1 (Slave) Present
B
A
DEVICE 0 (Master)
B
A
DEVICE 1 (Slave)
B
A
CABLE SEL
B
A
DEVICE 1 (Slave) Present
B
47