Hitachi HDT725025VLA380 - Deskstar 0A33423 T7K500 250GB SATA 7200RPM 8MB Cache Hard Drive Specifications page 62
3.5 inch hard disk drive
Hide thumbs
Also See for HDT725025VLA380 - Deskstar 0A33423 T7K500 250GB SATA 7200RPM 8MB Cache Hard Drive:
- Features & specifications (2 pages)
Table of Contents
Advertisement
Notes:
1. These jumper settings are used for limiting power supply current when multiple drives are used.
2. Command to spin up is SET FEATURES (subcommand 07h). Refer to 12.28 Set Features.
3. To enable the CSEL mode (Cable Selection mode) the jumper block must be installed at E-F. In the CSEL
mode the drive address is determined by AT interface signal #28 CSEL as follows:
•
When CSEL is grounded or at a low level, the drive address is 0 (Device 0).
•
When CSEL is open or at a high level, the drive address is 1 (Device 1).
Deskstar T7K500 Hard Disk Drive Specification
48
Hide quick links:
Advertisement
Table of Contents
