Connection; Connecting To Monitor; Connecting To Power - Samsung SCD-2060E User Manual

connection

CONNECTING TO MONITOR

Connect the VIDEO-OUT jack to the VIDEO-IN jack of the monitor.
CCTV Camera
As the connecting method varies with the instruments, refer to the manual supplied with
the instrument.
Only connect the cable when the power is turned off.

CONNECTING TO POWER

Connect the adaptor to the power input terminal as shown in the fi gure below. The
recommended adaptor specifi cation for SCD-2060E is DC 12V / 500mA or AC 24V /
300mA.
When the resistance value of copper wire is at [20°C(68°F)]
Copper wire size (AWG) #24 (0.22mm
Resistance (Ω/m)
Voltage Drop (V/m)
As shown in the table above, voltage decreases as the wire gets longer. Therefore
use of an excessively long adaptor output line for connection to the camera may
affect the performance of the camera.
* Standard voltage for camera operation : AC 24V ± 10%, DC 12V ±10%
* There may be some deviation in voltage drop depending on the type of wire and the manufacturer.
16_ connection
---- Power Input Terminal
2
) #22 (0.33mm
0.078 0.050
0.028 0.018
Monitor
2 2
) #20 (0.52mm ) #18 (0.83mm
0.030
0.011
2
)
0.018
0.006
U