Warranty Coverage - Ford F-150 SVT Raptor Supplement Manual

Warranty coverage

WARRANTY COVERAGE
The F-150 Raptor carries the same New Vehicle Limited Warranty as
other Ford F-150 models. This information is covered in its entirety in
your Warranty Guide.
Warranty service for the F-150 Raptor or any SVT vehicle can be
obtained at any Ford dealer nationwide.
SVT does not recommend modifying or racing SVT vehicles, as they are
designed and built to be driven as delivered from the factory. The
Warranty Guide discusses vehicle usage and the installation of
aftermarket parts and their effect on warranty coverage.
Ford SVT has engineered your F-150 Raptor for off-road use beyond
what is normal for a F-150. However, it can incur damage if driven
beyond its capabilities. Skid plates, shock guards and running boards
were designed to help limit damage to vital components and exterior
finishes, but cannot prevent all damage if driven in extreme off-road
conditions. Damage to skid plates, shock guards, running boards and
exterior finishes as well as bent, cracked or broken body, frame and
chassis components may not be covered by warranty.
Vehicle damage caused by driving through deep water at excessive
speeds may not be covered under warranty. (See Driving your F-150
SVT Raptor off-road in the Driving chapter of the supplement for
maximum allowable vehicle speeds when driving in deep water
conditions).
Please see the Warranty Guide for complete information.
Perform Multi-Point Inspection and the inspections outlined in
Scheduled Maintenance Intervals found in the scheduled maintenance
information. Refer to the vehicle's Workshop Manual for removal and
installation procedures. Replace with genuine Ford and Motorcraft
service parts as needed.
These modifications may not necessarily protect your engine from
damage in competition conditions. Subjecting your vehicle to competition
conditions even with these proposed modifications may render repairs
non-reimbursable under the New Vehicle Limited Warranty.
35
2012 F-150 (f12)
Supplement, 1st Printing
USA (fus)