Fastening The Safety Belts - Ford Super Duty Owner's Manual

Hide thumbs Also See for Super Duty:

Table of Contents

FASTENING THE SAFETY BELTS

The front outboard and rear safety restraints in your vehicle are

combination lap and shoulder belts.

Using the Safety Belt with Cinch Tongue (Front Center and Rear

Center Seats Only)

The cinch tongue will slide up and down the belt webbing when the belt

is stowed or while putting safety belts on. When the lap and shoulder

safety belt is buckled, the cinch tongue will allow the lap portion to be

shortened, but pinches the webbing to keep the lap portion from getting

longer. The cinch tongue is designed to slip during a crash, so always

wear the shoulder belt properly and don't allow any slack in either the

lap or shoulder portions.

2013 F-250/350/450/550 (f23)

Owners Guide gf, 3rd Printing, December 2012

Safety Belts

1. Insert the belt tongue into the

proper buckle (the buckle closest to

the direction the tongue is coming

from) until you hear a snap and feel

it latch. Make sure the tongue is

securely fastened in the buckle.

2. To unfasten, press the release

button and remove the tongue from