Playing A Blu-Ray Disc Player/Dvd Player; Playing A Blu-Ray Disc Player Compatible With Denon Link; Turning Off The Sound Temporarily - Denon AVR-3313CI Owner's Manual

Adjusting the master volume
VOLUME df
Use to adjust the
volume.
• The volume display method varies
depending on the "Scale" setting
(vpage 116).
n When the "Scale" setting
(vpage 116) is "0 – 98"
GAdjustable rangeH 0.0 0.5 – 98.0
n When the "Scale" setting (vpage 116) is "–79.5dB –
18.0dB"
GAdjustable rangeH – – –.– –79.5dB – 18.0dB
• The variable range differs according to the input signal and channel
level setting.
You can also adjust the master volume by turning
on the main unit.

Turning off the sound temporarily

MUTE :
Press .
• "MUTE" indicator on the display flashes.
:
• appears on a TV screen.
• The sound is reduced to the level set at "Mute Level" (vpage 116).
MUTE :
• To cancel, press again. Muting can also be canceled by
adjusting the master volume.
DVD
Important information
Playing a Blu-ray Disc player/DVD
player
The following describes the procedure for playing Blu-ray Disc player/
DVD player.
1
Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
POWER X
Press
to the unit.
3
Press Blu-ray
player used for playback.
4
Play the Blu-ray Disc player or DVD player.
MASTER VOLUME
• Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.
to turn on power
or DVD to switch an input source for a
37
Playing a Blu-ray Disc player
compatible with Denon Link HD
• Denon Link HD uses the clock of the AV amplifier connected by
Denon Link to achieve HDMI signal transfer with low jitter when
playing BD.
• To play Denon Link HD signals, make HDMI and Denon Link
connections with a compatible Blu-ray disc player ("Connecting a
player compatible with the Denon Link HD function" (vpage 12).
1
Prepare for playback.
q Turn on the power of the TV,
subwoofer and player.
w Change the TV input to the input of
this unit.
e Load the disc in the player.
2
POWER X
Press to turn on power
to the unit.
3
Perform the settings of the "Input Assign" menu
(vpage 125).
q Assign HDMI connectors for the input source.
(example: Blu-ray)
w Set "DIGITAL" to "D.LINK".
4
Set "HDMI Control" (vpage 121) to "On".
5
Press the input source select button (example: Blu-
ray) to switch an input source assigned in step 3 - q.
6
Set the audio input mode to "Auto" using the "Input
Mode" menu (vpage 127).
• The default setting of "Input Mode" is "Auto".
7
Play the component connected to this unit.
• Make the necessary settings on the player (language setting,
subtitles setting, etc.) beforehand.