Assembly - Craftsman 486.243201 Owner's Manual

CARTON CONTENTS
1. Poly Tray
2. Handle Tube
3. Front Tongue
4. Rear Tongue
5. Latch Stand Plate
CARTON CONTENTS
TOOLS REQUIRED FOR ASSEMBLY
(1) Screwdriver
(1) Pliers
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 9/16" Wrenches
• Remove the hardware pack and all loose parts
from the carton. Be sure the carton is empty before
discarding.
• Lay out all the parts shown on pages 3 and 4.
NOTE: All 1/4" fl at washers should be assembled so that
they rest directly against the poly tray surface.
STEP 1: (SEE FIGURE 1)
• Assemble the latch lock between the latch mount
brackets using a 1/4" x 1" hex bolt (E) and a 1/4"
nylock nut (J). Tighten so that the latch lock can still
pivot. Attach the extension spring (N) to the latch lock
and the latch mount bracket.
(Loose Parts in Carton)
6. Latch Stand Bracket
7. Hitch Bracket
8. Leg Stand Bracket
9. Latch Lock
10. Latch Mount Brackets (2)
3
4

ASSEMBLY

1
2
5
8
7
• Insert the 3/8" x 1" clevis pin (H) through the holes
in the latch mount brackets and secure with an 1/8"
hairpin cotter (M).
(E) 1/4" x 1"
HEX BOLT
(H) 3/8" x 1"
CLEVIS PIN
FIGURE 1
4
11. Wheel Support
12. Axle
13. Wheels (2)
14. Handle Grip
14
6
9
10
LATCH MOUNT
BRACKETS
(J) 1/4" NYLOCK NUT
LATCH LOCK
11
12
13
(N) EXTENSION
SPRING
(M) 1/8" HAIRPIN
COTTER