OWNERS. MANUAL Model No. 486.24385 CRAFTSMAN UTILITY 10 POLY CONVERTIBLE CART CAUTION: Before using this product,, Safety •. read this manual and follow all Safety Rules and • Assembly Operating Instructions. • Operation • Maintenance • Parts Sears, Roebuck and Co., Hoffman Estates, IL.
Lookforthissymboltopointoutimportantsafetyprecautions. Become alertH Your safety is involved. ltmeans--Attentlonl! CRAFTSMAN POLY CART LIMITED ONEYEAR WARRANTY ON For one year from the date of purchase, when this poly cart is maintained and lubricated according to the operating and maintenance instructions in the owner's manual, Sears will repair any defect in matedal or workmanship free of -charge.
HARDWARE SHOWN FULL SIZE • _1_/N © Not Shown Full Size • Quant. Ref. Quant. Description Description Hex Bolt, 3/8" x 4" Flat Washer, 1/4" Fiat Washer, 3/4" Hex Bolt, 3/8" x 1" Hex Bolt, 5/16" x 1• Hex Lock Nut, 1/4-20 Hex Bolt, 1/4"...
CARTON CONTENTS (Loose Parts in Carton) 11. Hitch Bracket 6. Wheel Support 1. Poly Tray 2. Handle Tube 7. Front Tongue 12. Leg Stand Bracket 3. Tool Holder Bracket 13. Latch Lock 8. Rear Tongue 4. Latch Stand Plate 9. Wheels (2) 14.
Assemble the hitch bracket to the front tongue using • Assemble the latch lock subassembly to the rear two 3/6" x 1" hex bolts, 3/8" Iockwashers and 3/8" tongue using two 1/4" x 3/4' hex bolts and 1/4" hsx lock nuts. Tighten. See figure 4; (SEMS) type hex nuts.
o. Assemble a 3/4" fiat washer, a wheel with the valve 5/16" x 3/4" stem facing out, and another 3/4" fiat washer onto TRUSS HEAD the axle. Insert a cotter pin through the axle, BOLT spreading the ends so that a hub cap can fit over the cotter pin.
Aligntheholesinthehandle withtheholes inthe bottom Of the poly tray, the latch stand plate and the latch stand bracket. Fasten together using four 1/4" x 2" hex bolts, 1/4" fiat washers and 1/4" (SEMS) hex nuts as shown in figure 9. Tighten. At this time tighten all bolts which were leR loose.
KNOWYOUR CART TOOLHOLDER BRACKET HANDLE TUBE LATCHLOCK LEG STAND BRACKET LATCHLOCK CLEVISPIN 3/8" x4" CLEVIS PIN FRONT TONGUE TOOL HOLDER BRACKET Designed to hold small hand tools. HANDLE TUBE Used to transport and dump the cart when it is converted into a push cart. LATCHLOCK Secures the cart bed to the tongue.
USING AS A PUSH CART_ For best handling, and to help prevent accidental IMPORTANT: Leave the latch lock clevis pin in place at all times while using the cart as a push cart. The tipping, distribute the weight of the load evenly in the cart.
@'_ 24 PART DESCRIPTION PART DESCRIPTION Washer, Fiat 1/4" Std. Wrt. 47019 43088 Poly Tray 23026 Axle, 3/4" 43001 HexBolt, 3/8-16xl"Lg.* 43008 43003 Lock Washer, 3/8" * Wheel Assembly 43648 24392 Tongue, Front Hex Bolt, 1/4-20 x 1-1/2" Lg. * 24391 43814 Tongue, Rear...
CAUTION: DO NOT OPERATE YOUR TRACTOR AND CART ON A TRACTOR'S TOWING AND BRAKING CAPABILfflES BEFORE SLOPE IN EXCESS OF 10 DEGREES. BE SURE OF YOUR OPERATING ON A SLOPE. AVOID ANY SUDDEN TURNS OR MA* NEUVERS WHILE ON A SLOPE,...
For the repair or replacement parts you need delivered directly to your home Call 7 am - 7 pm, 7 days a week 1-800-366-PART (1-800-366-7278) For in-home major brand repair service Call 24 hours a day, 7 days a week 1-800-4-REPAIR (1-800-473-7247) For the location of a Sears Parts...