Table of Contents
Advertisement
CARTONCONTENTS (Loose Partsin Carton)
1. PolyTray
6. LatchStandBracket
11. W heel S upport
2. Handle Tube
7. HitchBracket
12. A xle
3. Front T ongue
8. LegStandBracket
13. W heels (2)
4. RearTongue
9. LatchLock
14.HandleGrip
5. LatchStandPlate
10.LatchMount B rackets (2)
11
9
10
CARTON CONTENTS
TOOLS REQUIRED
FOR ASSEMBLY
(1) Screwdriver
(1)Pliers
(2) 7/16" Wrenches
(2) 1/2" Wrenches
(2) 9/16" Wrenches
Remove the hardware pack and all loose parts
from the carton. Be sure the carton is empty before
discarding.
Lay out all the parts shown on pages 3 and 4.
NOTE: All 1/4" flat washers should be assembled so that
they rest directly against the poly tray surface.
STEP 1 : (SEE FIGURE
1)
Assemble the latch lock between the latch mount
brackets using a 1/4" x 1" hex bolt (E) and a 1/4"
nylock nut (J). Tighten so that the latch lock can still
pivot. Attach the extension spring (N) to the latch lock
and the latch mount bracket.
Insert the 3/8" x 1" clevis pin (H) through the holes
in the latch mount brackets and secure with an 1/8"
hairpin cotter (M).
LATCH MOUNT
BRACKETS
(E) 1/4" × 1"
HEX BOLT
(J) 1/4" NYLOCK NUT
(N) EXTENSION
SPRING
/
(H) 3/8" x 1"
CLEVIS PIN
(M) 1/8" HAIRPIN
l
COTTER
LATCH LOCK
FIGURE
1
4
Advertisement
Table of Contents
