Ford Explorer Owner's Manual page 279

To turn off traction control in the AdvanceTrac system, select traction
control off in the message center. Full features of the AdvanceTrac
system can be restored by selecting it on again or by turning off and
restarting the engine.
If you switch off traction control in
the AdvanceTrac with RSC
system, the stability control off light
will illuminate steadily. Selecting
traction control on again will turn
off the stability control off light.
Note: If the system cannot be turned off, refer to MyKey in the Locks
and Security chapter for more information.
Note: In R (Reverse), ABS and the engine traction control and brake
traction control features will continue to function; however, ESC, RSC
and Curve Control are disabled.
Note: Curve Control can be disabled with the terrain management
control (if equipped). See Terrain Management later in this chapter.
Operation
Default at
start-up initialization
Traction
Selected once
control off
Selected again AdvanceTrac
after deactivation fully enabled
Note: The ESC/RSC /Curve Control systems cannot be turned on or
off through the message center.
Trailer sway control
When properly equipped, trailer sway control will use the vehicle's
AdvanceTrac with RSC system to detect and help reduce trailer sway
by applying brake force at individual wheels and, if necessary, by
reducing engine power. Trailer sway control is only enabled above
40 mph (64 km/h).
2012 Explorer (exp)
Owners Guide, 1st Printing
USA (fus)
AdvanceTrac Features
Stability
control
Mode
light
center display
( )
Turns on
System
at
start-up
On
CONTROL OFF
Off
Driving
OFF
Message
TCS
None Enabled
TRACTION
Disabled
TRACTION
Enabled
CONTROL ON
279