ELECTRONICS
Transfer Ongoing Call Between Handset And Vehicle
•
During an on-going call, touch the Transfer soft-key on the Phone main screen to transfer
an on-going call between handset and vehicle.
Common Phone Commands (Examples)
•
"Call John Smith"
•
"Call John Smith mobile"
•
"Dial 1 248 555 1212
•
"Call Emergency"
•
"Call Towing Assistance"
•
"Redial"
Phonebook
•
Uconnect® radios automatically downloads your phonebook from your paired phone, if
this feature is supported by your phone. Entries are updated each time that the phone is
connected. If your phone book entries do not appear, check the settings on your phone.
Some phones require you to enable this feature manually.
•
Your phonebook can be browsed on your radio screen, but editing can only be done on
your phone.To browse, touch the Phone soft-key, then the Phonebook soft-key.
•
Favorite phonebook entries can be saved as Favorites for quicker access. Favorites are
shown at the top of your main phone screen.
Voice Command Tips
•
Using the complete name of a contact, as stored in your phonebook, (i.e; Call John Doe
vs. Call John) results in greater system accuracy.
•
You can 'chain' commands together for faster results. Say "Call John Doe, mobile, " for
example.
•
If you are listening to available voice command options, you do not have to listen to the
entire list.When you hear the command that you need, press the
steering wheel, wait for the beep and say your command.
Changing The Volume
•
Start a dialogue by pressing the Phone button
"Help".
•
Use the radio ON/OFF VOLUME rotary knob to adjust the volume to a comfortable
level while the Uconnect® system is speaking. Please note the volume setting for
Uconnect® is different than the audio system.
40
, then say a command for example -
button on the