Turn Signals/Wiper/Washer/High Beams Lever; Turn Signals/Lane Change Assist; Rear Wiper/Washer; Wind Buffeting - Chrysler Aspen Quick Reference Manual

Washer

Turn Signals/Wiper/Washer/High Beams Lever

TUrn SignALS/LAnE cHAngE ASSiST

Tap the lever up or down once and the turn signal (right or left)
•
will flash three times then automatically turn off.
wiPErS
Intermittent, Low and High Operation
rotate the end of the lever to the first detent position for one of five
•
intermittent settings, the second detent for low wiper operation and
the third detent for high wiper operation.
Washer
Push the end of the lever in and hold for as long as spray is desired.
•
High Beams
Pull the lever toward you past the detent to activate the
•
High Beams.
A High Beam symbol will illuminate in the cluster to indicate the
•
High Beam lights are on.

Rear Wiper/Washer

A rotating switch on the climate control turns the rear wiper
•
On/Off. Pushing this switch inward activates the rear washer.

Wind Buffeting

wind buffeting can be described as a helicopter-type percussion
•
sound. if buffeting occurs with the rear windows open, adjust the
front and rear windows together.
if buffeting occurs with the sunroof open, adjust the sunroof
•
opening, or adjust any window. This will minimize the buffeting.
Wipers
Pull Lever for
High Beams