Replacement Bulbs - Chevrolet Uplander Owner's Manual

A. Stoplamp/Taillamp
B. Turn Signal Lamp
C. Back-up Lamp Bulb
5. Turn the bulb socket counterclockwise to remove.
6. Replace the bulb by pulling the old bulb out of
the socket and gently pushing in a new bulb.
7. Replace the bulb socket by inserting and turning
clockwise to secure.
8. Reinstall the taillamp assembly by inserting the
outboard locating/retaining pins until the lamp
is seated.
9. Secure with the inboard screws.

Replacement Bulbs

Exterior Lamp
Back-up
Front Turn Signal, DRL and Parking
High-Beam and Low-Beam
Headlamps
Sidemarker
Stoplamp, Taillamp and Turn Signal
For replacement bulbs not listed here, contact your
dealer.
Bulb Number
3057K
5702KA
H11
194
3057K
5-49